Demonstration Support System PASS

Tripod base PHYWE

Function and Applications

Tripod base -PASS-

Manufactured of zinc die-cast with lacquered finish 

Equipment and technical data

• Tripod base for rods 6 to 14 mm diameter
• three adjusting screws for alignment
• weight ...

Barrel base PHYWE

Right angle clamp PHYWE

Function and Applications

Right angle clamp -PASS- for secure attachment of round or square rods

Benefits

• for cross, T or parallel clamping

Equipment and technical data

• To hold plates, rulers, plate springs e ...

Bench clamp PHYWE

For vertical clamping of rods totable-top edges in 2 prismaticclamps with fast clamping screw.Large plastic clamping disk toavoid damage to table.Material: aluminium diecastClamping screw: plastic w. steelinsertClamping range:round rods: 6...14 mmsquared profiles max.:12 mm x 12 ...

Support rod PHYWE,square,l 250mm

Equipment and technical data

• steel tube, corrosion protectionthrough glossy zinc coating
• square section 12 mm x 12 mm
•  with 10 mm diameter and 45 mm longclamping end; openend closed by cap.

Support rod PHYWE,square,l 400mm

Square section 12 mm x 12 mmsteel tube, corrosion protectionthrough glossy zinc coating toDIN 50961 and transparentchromium coating to DIN 50941,with 10 mm diameterand 45 mm longclamping end; openend closed bycap.

Support rod PHYWE,square, l 630mm

Support rod, l = 630 mmsquare section 12 mm x 12 mmsteel tube 10mm diameter & 45 mmlong clamping end,open end closed by cap.

Support rod PHYWE, square, l = 1000 mm

Function and Applications

Support rod -PASS- as stand material.

Equipment and technical data

• Square section steel tube.
• Corrosion protection through glossy zinc coating and transparent chromium coating.
• Dimensions, square sect ...

Support rod PHYWE,square,l 1250mm

Square section 12 mm x 12 mmsteel tube, corrosion protectionthrough glossy zinc coating toDIN 50961 and transparentchromium coating to DIN 50941,with 10 mm diameterand 45 mm longclamping end; openend closed bycap.

Clamp with rod PHYWE

Converts the right angle clampinto a swivel clamp, allowing the clamping of objects in any direction. Material temperature resistant, glass fibrereinforced plastic clamping range forround rods 4.15 mm for square profiles4 × 4...12 × 12 mm, rod diameter 12 mm,rod length 32 mm