Applied Mechanics

 
Pleas use the tabs to display the product type (Experiments, Sets, Products or Lit./Softw.).
 

Page 2 of 3

  <<  Back    1  2  3    Next page  >>

Spectral investigations

Principle

An echoscope is used to investigate the difference between a spectrum produced by a pulse and a spectrum produced by a periodic signal using multiple reflections from a block. The periodic spectrum allows the cepstrum (Fourier transform of the log spectrum) to ...

 
Details

Product-No: P5161300

Surface of rotating liquids

Principle

A vessel containing liquid is rotated about an axis. The liquid surface forms a paraboloid of rotation, the parameters of which will be determined as a function of the angular velocity.

Tasks

On the rotating liquid surface, the followin ...

 
Details

Product-No: P2140200

Optical determination of the velocity of sound in liquids

Principle

A stationary ultrasonic wave in a glass cell full of liquid is traversed by a divergent beam of light. The sound wave length can be determined from the central projection of the sound field on the basis of the refractive index which changes with the sound pressure.

 
Details

Product-No: P2151000

Phase and group velocity of ultrasound in liquids

Principle

The sound waves transmitted to a liquid by the ultrasonic generator are picked up by a piezoelectric ultrasonic pick-up and the signal from transmitter and receiver compared on an oscilloscope. The wavelength is determined and the phase velocity calculated from the ...

 
Details

Product-No: P2151100

Temperature dependence of the velocity of ultrasound in liquids

Principle

Sound waves are radiated into a liquid by an ultrasonic transmitter and detected with a piezoelectric transducer. The wavelength of the sound is found by comparing the phase of the detector signal for different sound paths and, when the frequency is known, the veloc ...

 
Details

Product-No: P2151200

Determination of length and position of an object which can-not be seen

Principle

This experiment provides training in determining the length and position of an object based on an X-ray image. A metal pin that is embedded in a wooden block is used as the model. This experiment is also an excellent preparatory exercise for demonstra ...

 
Details

Product-No: P2542001

Debye-Scherrer diffraction patterns of powder samples withthree cubic Bravais lattices (Bragg-Brentano-geometry)

Principle

Polycrystalline powder samples, which crystallize in the three cubic Bravais types, simple, face-centered and body-centered, are irradiated with the radiation from a Roentgen tube with a copper anode. A swivelling Geiger-Mueller counter tube detects t ...

 
Details

Product-No: P2542101

Debye-Scherrer diffractions pattern of powder samples with adiamond structure (according to Bragg-Brentano)

Principle

Polycrystalline powder samples, which crystallize in the three cubic Bravais types, simple, face-centered and body-centered, are irradiated with the radiation from a Roentgen tube with a copper anode. A swivelling Geiger-Mueller counter tube detects t ...

 
Details

Product-No: P2542201

Debye-Scherrer diffraction patterns of powder samples with ahexagonal lattice structure

Principle

A polycrystalline powder sample of zinc is irradiated with the radiation from a X-ray tube with a copper anode. A Geiger-Mueller counter tube is automatically swivelled to detect the radiation that is constructively reflected from the various lattice ...

 
Details

Product-No: P2542301

Debye-Scherrer diffraction patterns of powder samples with atetragonal lattice structure

Principle

A polycrystalline powder sample of lead dioxide is irradiated with the radiation from a X-ray tube with a copper anode. A Geiger-Mueller counter tube is automatically swivelled to detect the radiation that is constructively reflected from the various ...

 
Details

Product-No: P2542401

Debye-Scherrer diffraction patterns with a cubic powder sam-ple

Principle

A cubic crystalline powder sample is irradiated with the radiation from a X-ray tube with a copper anode. A Geiger-Mueller counter tube is automatically swivelled to detect the radiation that is constructively reflected from the various lattice planes ...

 
Details

Product-No: P2542501

Diffraction measurements to determine the intensity of De-bye-Scherrer reflexes using a cubic powder sample

Principle

A polycrystalline, cubic face-centered crystallizing powder sample is irradiated with the radiation from a Roentgen tube with a copper anode. A Geiger-Mueller counter tube is automatically swivelled to detect the radiation that is constructively refle ...

 
Details

Product-No: P2542601

Debye-Scherrer diffraction measurements for the examination of the texture of rolled sheets

Principle

A polycrystalline, cubic face-centered crystallizing copper powder sample and a thin copper sheet are separately irradiated with the radiation from a Roentgen tube with a copper anode. A Geiger-Mueller counter tube is automatically swivelled to detect ...

 
Details

Product-No: P2542701

X-ray energy spectroscopy - calibration of the X-ray energydetector

Principle

Various metal samples are subjected to polychromatic X-rays. The resulting fluorescence radiation is analysed with the aid of a semiconductor detector and a multi-channel analyser. The maxima of intensity of the corresponding characteristic X-ray line ...

 
Details

Product-No: P2544001

Energy resolution of the X-ray energy detector

Principle

Various metal samples are subjected to polychromatic X-rays. The resulting fluorescence radiation is analysed with the aid of a semiconductor detector and a multi-channel analyser. The energy of the characteristic X-ray lines and their full widths at ...

 
Details

Product-No: P2544101

Page 2 of 3

  <<  Back    1  2  3    Next page  >>

X-ray expert unit

This product is a world first

PHYWE presents the new x-ray unit: innovative technology, top safety, maximum comfort!

More