Print this page

RC filters

Product No: P2440801

Principle

Resistor-Capacitor (RC) circuits serve as filters for frequencies. The frequency response of the most commonly used RC filters is recorded by point-by-point measurements as well as the frequency sweep method, and displayed on the oscilloscope. The results are plotted and verified using the measure analysis software.

Tasks

Record the frequency response of the output voltage of 1. a high-pass filter, 2. a low-pass filter, 3. a band-pass filter, 4. a Wien-Robinson bridge, 5. a parallel-T filter, point by point and to display the sweep on the oscilloscope. Investigate the step response of, 6. a differentiating network, 7. an integrating network.
Analyse and verify the measurements using the measure analysis software.

What you can learn about

High-pass
Low-pass
Wien-Robinson bridge
Parallel-T filters
Differentiating network
Integrating network
Step response
Square wave
Transfer function

Materiallist (Excerpt)	Product	Amount
Digital Function Generator, USB, incl. Cobra4 Software	13654-99	1
25 MHz Digital storage oscilloscope with colour display, 2 x BNC cables l =75 cm incl.	11456-99	1
Difference amplifier	11444-93	1
Plug-in board,4mm plugs	06033-00	1
Resistor 500 Ohm 2%, 1W, G1	06057-50	1
Capacitor 10nF/ 250V, G1	39105-14	4
Resistor 1kOhm, 1W, G1	39104-19	5
Screened cable, BNC, l 1500 mm	07542-12	2
Connector, T type, BNC	07542-21	1
Screened cable, BNC, l 750 mm	07542-11	2
Adapter, BNC-plug/socket 4 mm.	07542-26	2
Connecting plug white 19 mm pitch	39170-00	5
Connecting cord, 32 A, 500 mm, red	07361-01	2
Connecting cord, 32 A, 500 mm, blue	07361-04	3
Connecting cord, 100 mm, yellow	07359-02	1
Laboratory Experiments Physics, Chemistry, Biology andApplied Sciences, CD-ROM, incl. operating manuals	16502-42	1