Print this page

Cobra4 Display-Connect, Set of transmitter and receiver for using the Cobra4 Mobile-Link with large-scale displays

Product No: 12623-88

Function and Applications

Device combination from a sender and a receiver for the radio-based communication between a Cobra4 Mobile Link and up to 2 digital large displays.

Benefits

The system works with 5 switchable send channels at a carrier frequency of 433 MHz.
With this set it is possible to represent the measured values wellreadable for a big auditory in a classroom or lecture hall.
For this purpose must the transmit unit only be inserted between an any Cobra4 SensorUnit and the Cobra4 Mobile-Link.
The receiver unit is pluged into the input socket of the digital large display.
The current supply of the sender and receivers occurs in each case via the devices at those ones these are connected.
A parallel write-out of a series of measurements to the SD-Card of the Mobile-Link is possible.

Equipment and technical data

Excerpt from the item list

Itemlist	Product	Amount
Cobra4 Display-Connect TX, transmitter for using the Cobra4 Mobile-Link with large-scale displays	12623-00	1
Cobra4 Display-Connect TX, receiver for using the Cobra4 Mobile-Link with large-scale displays	12623-01	1