setTimeout(function(){ window.print(); },500)
 

Technical data


Magnetic field of single coils/ Biot-Savart's law with a teslameter

Article no: P2430201

Principle

The magnetic field along the axis of wire loops and coils of different dimensions is measured with a teslameter (Hall probe). The relationship between the maximum field strength and the dimensions is investigated and a comparison is made between the measured and the theoretical effects of position.

Benefits

  • Simple setup which allows an easy measurement of the magnetic flux density depending on different parameters
  • No calibration needed, Teslameter is calibrated  up to 1 T

Tasks

  1. To measure the magnetic flux density in the middle of various wire loops with the Hall probe and to investigate its dependence on the radius and number of turns.
  2. To determine the magnetic field constant.
  3. To measure the magnetic flux density along the axis of long coils and compare it with theoretical values.

Learning objectives

  • Wire loop
  • Biot-Savart's law
  • Hall effect
  • Magnetic field
  • Induction
  • Magnetic flux density

Scope of delivery

Induction coils, 1 set (7 coils) 11007-88 1
Conductors, circular, set 06404-00 1
PHYWE Teslameter, digital 13610-93 1
Hall probe, axial 13610-01 1
PHYWE Power supply, universal, analog display DC: 18 V, 5 A / AC: 15 V, 5 A 13503-93 1
Meter scale, l = 1000 mm 03001-00 1
PHYWE Digital multimeter, 600V AC/DC, 10A AC/DC, 20 MΩ, 200 µF, 20 kHz, −20°C…760°C 07122-00 1
Barrel base expert 02004-00 2
Stand rods, stainless steel, various sizes 02031-00 1
Distributor 06024-00 1
Right angle clamp expert with fulcrum screw 02054-00 1
Lab jack, 200 x 200 mm 02074-01 1
Reducing plug 4mm/2mm socket, 2 11620-27 1
Connecting cable, 32 A, blue, various lengths 07361-04 1
Connecting cable, 32 A, red, various lengths 07361-01 2
Universal clamp 37715-01 1

PHYWE Systeme GmbH & Co. KG
Robert-Bosch-Breite 10 – 37079 Göttingen – Germany
www.phywe.com