Ultra-Sound Operation Unit, complete

Function and Applications

Ultrasonic Operation Unit complete

Benefits

• Microprocessor controlled quartzstabilised operation unit for ultrasonic transmitter and receiver.
• Adjustable output amplitude, 2 DIN sockets, one with 180° phaseshift, continuous and burst mode operation.
• 1 synchronous BNC output for delay time measurement.
• Input signal amplifier with 3 main amplifications and fine adjustment with one BNC-socket for oscilloscope and 4 mm sockets for XY-recorder.
• Overload warning LED allows adaption of ultrasound intensity to the experiment.
• Ideally suited for ultrasound experiments with large distances between transmitter and receiver,e.g. Doppler-effect with ultrasound.
• Fail-safe housing.

Equipment and technical data

Ultrasound operation unit:

• Frequency (quartzstab.): 40 kHz
• Range: 39...41 kHz
• Step width: 300 Hz
• Transmitter output:2 x DIN-socket and 1 synchronised BNC-socket
• Phase shift: 0° or 180°
• Receiver input: BNC-socket
• Receiver output: AC-signal BNC
• XY-recorder (± 10 V) 4 mm-sockets
• Supply: 100...260 V AC/5 V AC
• Frequency: 50...60 Hz
• Dimensions (H×W×D) (mm):138 × 205 × 160
• Mass: 980 g

Power supply:

• Power supply with plug and 1.3 m linecable and 2 m cable on secondary output side.
• Input voltage: 100...260 V AC
• Frequency: 50...60 Hz
• Output voltage: 5 V DC
• Output current: 2.4 A
• Output plug:Outer diameter: 5 mm and inner diameter: 2.1 mm
• Dimensions (mm): 40 × 41 × 120 mm
• Mass: 345 g