Water bath WTB with stainless steel gable cover, 7 l volume, 230 V

Function and Applications

Electrically heated water bath with thermostatic control. Ideal for tempering ointments, emulsions, samples, plates and culture media in the laboratory.

Benefits

• The microprocessor-controlled PID temperature controller guarantees minimal temperature fluctuations (±0.1 °C), short heating-up times and minimal overshoot of the selected temperature.
• The temperature setpoint is entered digitally and can be locked to prevent accidental adjustment.
• The actual temperature is displayed via a clear, unambiguous LED display.
• Pt100 temperature sensor, DIN class A, using 4-wire technology.
• The integrated digital timer, which also operates depending on the set temperature, has a running time from 0 to 99.59 hours.
• All values are displayed via the LED display.
• The self-diagnostic system integrated in the controller enables rapid fault detection and troubleshooting in the event of a malfunction.
• Very easy to clean due to one-piece construction.
• Entirely made of stainless steel.
• The bath is equipped with an inclined lid for condensate drainage.

Equipment and Technical Data

• Usable volume: 7 l
• Temperature range: +10 °C … +95 °C (minimum temperature 5 °C above ambient temperature)
• Power consumption: 1200 W
• Usable chamber dimensions (W × D × H) (mm): 240 × 210 × 140
• External dimensions (W × D × H) (mm): 468 × 356 × 337
• Weight: approx. 14 kg
• Supply voltage: 230 V, 50/60 Hz