Cobra SMARTlink is a state-of-the-art, high-performance 3-in-1 tablet. It is not only a great measuring and display device for digital science teaching, but also a full featured Android tablet. Due to the brilliant 10.1 inch display paired with the powerful hardware and the 7 internal measuring sensors it is perfectly equipped for the requirements of modern, digital, science education. Especially in student experiments Cobra SMARTlink is very good, easy and reliable to use.
Everything you need, exactly what you want.
Start measuring directly with seven integrated sensors and the pre-installed measuring software measureAPP.
Acceleration
Temperature (2x)
Current
Voltage
Light
UV
Humidity
Now even more performance for all your applications!
A powerful CPU and sufficient RAM ensure that everything always runs smoothly.
8 CPU cores
2.2 GHz CPU clocking
6 GB RAM
128 GB internal memory
On the ready, set, go.
Get started right away with more than 100 ready-to-use experiment descriptions for all disciplines (physics, chemistry, biology and natural sciences) in the pre-installed measureAPP.
Everything in perfect view.
A brilliant 10.1" display offers sufficient space for all applications as well as a detailed and pin sharp display.
10.1" (25.65 cm diagonal)
LED backlighting
Multi‑Touch
IPS Technology
1920 x 1200 resolution (WUXGA)
330 Nits brightness
When it needs to be something more.
More than 40 additional Cobra SMARTsense sensors connectable via Bluetooth and USB.
Internal memory 128 GB, expandable to 256 GB with microSD card
10.1 inch LCD touch screen (16:10), resolution 1,200 x 1,920 (WUXGA)
Front camera 8 MP, main camera 16 MP
Built-in loudspeaker, 3.5 mm headphone jack
Bluetooth 5.2, WiFi 5 a/b/g/n/ac
1 x USB type C to charge the device and for data communication e.g. via USB stick, PC
Battery: 10.000 mAh
Weight: 830 g
Internal sensors
Temperature: 2x Thermocouple type K
Measuring range: -200 ... 1200 °C
Resolution: 0.1 °C
Accuracy: +/- 3 %
Data rate: 10 Hz
Voltage: 1x voltage connection 4 mm sockets
Measuring range: -30V ... +30 V
Resolution: 20 mV
Accuracy: +/- 1 %
Data rate: 100000 Hz (100 kHz)
Current: 1 x power connection 4 mm sockets
Measuring range: -1A ... +1A
Resolution: 0,5 mA
Accuracy: +/- 1 %
Data rate: 100000 Hz (100 kHz)
Light (built-in sensor)
Measuring range: 1-128 kLx
Resolution: 1 Lx
Accuracy: +/- 4 %
Data rate: 10 Hz
Air humidity (built-in sensor)
Measuring range: 0 ... 100 %
Resolution: 0.1 %.
Accuracy: +/- 4 % (at 0-80 %)
Data rate: 10 Hz
UV (built-in sensor)
Measuring range: 0 ... 400 W/m²
Resolution: 0.1 W/m²
Accuracy: +/- 4 %
Data rate: 10 Hz
Acceleration (built-in sensor)
4 x USB 2.0 inputs for Cobra SMARTSense sensors, maximum data rate up to 10 kHz
Support
Frequently asked questions
It seems that either Bluetooth or / and location sharing is not enabled. The following video will show you how to choose the necessary settings.
It seems that you have recently connected to the PC and the USB connection is still active. The following video will show you how to choose the necessary settings.
Sharing the location is important to use external Cobra SMARTsense sensors via Bluetooth. Your location data will only be used on your device and will not be stored or used by PHYWE.
The following video will show you how to choose the necessary settings.
Could your questions not be answered so far? Then contact us:
