Frame for complete experiments

Function and Applications

Frame for complete Experiments made of aluminum profile with stable feet of blue lacquered sheet steel.

In the Frame for complete Experiments, the experiments are suspended, which are already mounted on the Panel for complete experiments (45510-00). For holding measuring devices, power supplies, etc., up to two Shelves with hanging device (45505-00) can also be hung into a frame. In addition, the frame has a suspension device for the Rear-cover for complete experiments (45501-00): This prevents light from entering from behind onto the assembled experiments.

Benefits

• The "Frame for complete Experiments" is only needed once for many experimental setups, since the setups can be completely lifted from the Panel for complete experiments (45510-00) and replaced by another experiment mounted on such a panel.
• Thanks to its far protruding feet, the frame stands very stably and generally supports all experimental setups completely safely without additional securing.
• The feet are equipped with large rubber pads, which largely prevent the frame from slipping on the chosen surface.
• For firm fixation on a base, the feet have lateral cutouts into which a suitable clamp (02014-00) can be inserted.
• If the frame is to be permanently fixed to a base, screws can be inserted through the designated holes in the feet.

Technical Specification

• Frame made of aluminum profile
• Height: 90 cm, Width: 46.5 cm
• Stable feet, sheet steel, l = 30 cm, powder-coated
• Clamps: Opening width: 60 mm, Width: 13 mm