Panel for complete experimental setups

Function and Applications

The Panel for complete experiments serves as a carrier for different experimental setups. It can be easily suspended in the Frame for complete Experiments (45500-00), thus allowing different setups to be prepared conveniently and exchanged quickly and easily for demonstrations.

The devices for the setups are attached to the panel with the help of designated holders either magnetically or via a regular hole grid, and can be positioned very flexibly on the panel. The panel itself is hung in a groove of the upper crossbar of the Frame for complete Experiments (45500-00), which works both vertically and horizontally.

To increase stability, the panel is edged on all four sides. To prevent disturbing light from entering from behind onto the experimental setups, the Frame for complete Experiments can additionally be fitted with a Rear-cover for complete experiments (45501-00), which shields the panel from backlight.

For each experimental setup, one Panel for complete experiments is required.

Benefits

• Time saving and easy handling: simple drying of the devices, safe setup, transport, and storage thanks to spring pins or strong magnets.
• Assemble an experiment once with plug-in system or magnets and simply take it out of the cabinet for execution.
• More than 10 holder devices with plug-in system and magnets available.
• Suspension in the Frame for complete Experiments (45500-00) vertically or horizontally.

Technical Specification

• Suspension in the frame vertically or horizontally
• Material: sheet steel, blue, powder-coated for high impact resistance and good chemical resistance
• Dimensions (cm): 65 x 48.8 x 2.5