setTimeout(function(){ window.print(); },500)
 

Technical data


Current-voltage characteristic of a solar cell

Article no: P1374100

Principle

The maximum utilisable power of a solar cell is dependent on the intensity of the incident light. Characteristic current-voltage curves are prepared under various illuminations.

Benefits

  • No additional cable connections between the building blocks needed - clear arragned and quick setup
  • Contact saftey due to puzzle blocks system
  • Corrosion-free gold plated contacts
  • Doubled earning sucess: Electric circuit diagram on top, real components can be seen unterside

Tasks

How does a load change the current and voltage of a solar cell?

Load a solar cell with a variable resistor. Note the values of the current and voltage at various values of the loading resistance.

 

Scope of delivery

Straight connector module, SB 05601-01 2
Angled connector module, SB 05601-02 3
Interrupted connector module with sockets, SB 05601-04 2
Junction module, SB 05601-10 2
On-off switch module, SB 05602-01 1
Socket module for incandescent lamp E10, SB 05604-00 1
Potentiometer module 250 Ohm, SB 05623-25 1
Solar cell 3.3 x 6.5 cm, with plugs, 0.5 V, 330 mA 06752-09 1
Holder for solar cell 3.3 x 6.5 cm, with plugs 06752-08 1
Connecting cable, 32 A, blue, various lengths 07360-04 2
Connecting cable, 32 A, red, various lengths 07361-01 1
Connecting cable, 32 A, red, various lengths 07360-01 2
Connecting cable, 32 A, blue, various lengths 07361-04 1
Filament lamp 6 V/3 W, E10, 10 pcs. 35673-03 1
PHYWE Analog multimeter, 600V AC/DC, 10A AC/DC, 2 MΩ, overload protection 07021-11 2
PHYWE Power supply, 230 V, DC: 0...12 V, 2 A / AC: 6 V, 12 V, 5 A 13506-93 1

PHYWE Systeme GmbH & Co. KG
Robert-Bosch-Breite 10 – 37079 Göttingen – Germany
www.phywe.com