Complete experiments, comfort set

Function and Applications

To work with the Complete Experiments Chemistry equipment system, holders and plates are required to assemble into an experimental setup. With this comfort set we have compiled a range of holders and plates that allows the demonstration of experimental setups where two frames for complete experiments are used simultaneously, or to present two experimental setups at the same time on one frame.

Benefits

• Time saving and easy handling: Simple drying of equipment, safe setup, transport, and storage thanks to spring cotter pins or strong magnets.
• Build the experiment once with plug-in system or magnets and simply take it from the cabinet for use.
• More than 10 holding devices with plug-in system and magnets available.
• Mounting in the frame for complete experiments (45500-00) vertically or horizontally.
• The “frame for complete experiments” is only needed once for many setups, since the setups on the plate for complete experiments (45510-00) can be lifted completely off the frame and replaced by another experiment mounted on such a plate.
• Thanks to its feet extending far beyond the frame, the frame stands very stable and generally carries all setups safely without additional securing.
• The feet are equipped with large rubber pads that largely prevent slipping of the frame on the chosen surface.
• For firm fixation on a base, the feet have lateral slots into which a suitable clamp (02014-00) can be inserted.
• If the frame is to be permanently fixed to a base, screws can be inserted through the pre-drilled holes in the feet.
• The rear wall prevents disturbing light incidence on complete experiments.

Technical Specification

• 2 frames for complete experiments 45500-00
• 2 plates for complete experiments 45510-00
• 2 rear walls for complete experiments 45501-00
• 2 shelves with suspension 45505-00
• 3 clamp holders, d = 18…25 mm, fixed 45520-00
• 2 clamp holders, d = 18…25 mm, rotatable 45521-00
• 2 clamp holders, d = 8…10 mm, rotatable 45522-00
• 1 holder for equipment, variable 45526-00
• 1 equipment carrier with holding magnets 45525-00
• 1 spring cotter pin, 50 pieces 45530-00
• 1 universal fastening straps, 100 pieces 45535-00
• 2 clamps 02014-00